现在铺设地板的方法很多，今天我们就简单的了解一下空铺法Today, many ways to lay the floor, today we will simply understand the empty shop method:
即铺贴PVC防水卷材时，卷材与基层仅在防水层的整体四周一定宽度内粘结；其余部分不粘结的施工方法。空铺法的施工工艺流程如下That is, when paving the PVC waterproof coiled material, the coil and the base are only in the waterproof layer of the whole of a certain width around the bond; the other part of the construction method is not binding. The construction process of empty paving method is as follows:
基层找平清理一弹线一卷材预铺设一卷材接缝搭接焊一特殊部位处理一固定、压边一密封材料封边一验收Clean up a bomb line base leveling roll pre laying roll seam welding special parts processing, a fixed pressure side of a sealing material sealing an acceptance.
首先卷材预铺设参照满粘法，纵向搭接宽度为50mm。其次，仅将整体防水工程的四周部位卷材进行满粘，并焊接搭接缝。横向采用对接处理，其上用200～250mm宽的无复合层(N类)PVC卷材覆盖搭接、施焊First of all, the pre laying of the coil is based on full adhesive method, and the longitudinal overlap width is 50mm. Secondly, only the whole waterproof project of the surrounding parts of the coiled material is full of sticky, and welded joint. Horizontal butt processing, the use of 200 to 250mm wide PVC layer (N) without overlapping layer covering, welding
你学会了吗，如果有不明白的地方随时可以拨打公司热线电话Have you learned how to call the company hotline at any time you don't understand?!